Newbie Help

Torridon · 08-17-2003, 10:49 PM

Hmmm,

How does one make a trigger send an empty entry to the Mud in the triggers. -the same as typing enter with an empty prompt-

I want to be able to have the trigger send3 or 4 blank lines to the Mud in between other commands. Unfortunately just putting blank lines in the editor doesn't work, they are autoedited out.

Delerak · 08-17-2003, 11:00 PM

Depending on the mud you could set a trigger for the symbol that they use for color. Like on roms it's usually ~ and some others it's $ and ^, type help color then just use that command alone, because it will not be used as a command though and just bring up your prompt. I wanna question why you would want to do this though? Sounds kind of pointless. Unless you are trying to fake botting or something, which is altogether pretty stupid.

-Delerak

Torridon · 08-17-2003, 11:59 PM

That won't work for what I need it for... I actually need to send an 'ENTER' to the Mud several times over.

As for why:- I was writing a notice, on a piece of parchment. I had to write 30 or so notices on 30 pieces of parchment.

I wanted to be able to make a trigger that when I bent over a new parchment, It would script write the notice, that way I wold only have to type it up in actuality once with appropriate RP between.

I needed to have a few lines space between paragraphs, but unfortunately couldn't work it out. .'s or >'s look awful.

My char writes alot of the same thing repetatively so I would rather not have to type up 30 lots of 3/4 of a page of writing each time.

Ogma · 08-18-2003, 12:42 AM

How about <spacebar> <enter>? That should get sent by zmud.

welcor · 08-18-2003, 12:09 PM

in zmud, the #cr command sends a carriage return to the current window.

Torridon · 08-18-2003, 07:00 PM

No, unfortunately doesn't work...

It might make the mud put in a space, but for the righting editor it does not allow make a line space appear on the parchment.

It is not actually sending the same info as when you press enter on the keyboard with a black entry. that is what I need - badly.

Jaewyn · 08-20-2003, 01:45 AM

If it is a blank line in the standard ROM or Smaug note editor you want, then I think all you need to do is type the standard color command and then press enter. i.e. }x <enter> or &w <enter> for smaug code. The color command acts as a placemarker similar to the "." or ">" you were talking about but can't normally be seen.

hoop · 08-20-2003, 11:54 AM

You should post your question on www.zuggsoft.com - the support for Zmud. They always have the answer to any Zmud question.

I've posted some advanced trigger questions on there before, and never been dissatisfied!

Hoop

ZMUD Trigger ?coding? - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zmud/Cmud help	lovechiefs	Tavern of the Blue Hand	0	01-31-2007 01:20 AM
Trigger only Client	Ozzyman	MUD Coding	0	01-29-2006 05:07 PM
Getting a MUD icon in zMUD - Last day!	Ntanel	MUD Announcements	2	02-23-2005 03:13 PM
zMUD	Enzo	Newbie Help	4	08-29-2004 03:05 PM
Command trigger for progs	Jaegar	MUD Coding	1	04-03-2003 06:41 PM

08-17-2003, 10:49 PM	#1
Torridon New Member Join Date: Aug 2003 Posts: 5	Hmmm, How does one make a trigger send an empty entry to the Mud in the triggers. -the same as typing enter with an empty prompt- I want to be able to have the trigger send3 or 4 blank lines to the Mud in between other commands. Unfortunately just putting blank lines in the editor doesn't work, they are autoedited out.

08-17-2003, 11:00 PM	#2
Delerak Senior Member Join Date: Apr 2003 Name: Dan Location: Florida Home MUD: Darksun MUD Posts: 462	Depending on the mud you could set a trigger for the symbol that they use for color. Like on roms it's usually ~ and some others it's $ and ^, type help color then just use that command alone, because it will not be used as a command though and just bring up your prompt. I wanna question why you would want to do this though? Sounds kind of pointless. Unless you are trying to fake botting or something, which is altogether pretty stupid. -Delerak

08-17-2003, 11:59 PM	#3
Torridon New Member Join Date: Aug 2003 Posts: 5	That won't work for what I need it for... I actually need to send an 'ENTER' to the Mud several times over. As for why:- I was writing a notice, on a piece of parchment. I had to write 30 or so notices on 30 pieces of parchment. I wanted to be able to make a trigger that when I bent over a new parchment, It would script write the notice, that way I wold only have to type it up in actuality once with appropriate RP between. I needed to have a few lines space between paragraphs, but unfortunately couldn't work it out. .'s or >'s look awful. My char writes alot of the same thing repetatively so I would rather not have to type up 30 lots of 3/4 of a page of writing each time.

08-18-2003, 12:42 AM	#4
Ogma Member Join Date: Apr 2002 Home MUD: DartMUD Posts: 86	How about <spacebar> <enter>? That should get sent by zmud.

08-18-2003, 12:09 PM	#5
welcor Member Join Date: Apr 2002 Location: Aarhus, Denmark, Europe Posts: 59	in zmud, the #cr command sends a carriage return to the current window.

08-18-2003, 07:00 PM	#6
Torridon New Member Join Date: Aug 2003 Posts: 5	No, unfortunately doesn't work... It might make the mud put in a space, but for the righting editor it does not allow make a line space appear on the parchment. It is not actually sending the same info as when you press enter on the keyboard with a black entry. that is what I need - badly.

08-20-2003, 01:45 AM	#7
Jaewyn Member Join Date: Aug 2002 Posts: 71	If it is a blank line in the standard ROM or Smaug note editor you want, then I think all you need to do is type the standard color command and then press enter. i.e. }x <enter> or &w <enter> for smaug code. The color command acts as a placemarker similar to the "." or ">" you were talking about but can't normally be seen.

08-20-2003, 11:54 AM	#8
hoop New Member Join Date: Apr 2002 Posts: 16	You should post your question on www.zuggsoft.com - the support for Zmud. They always have the answer to any Zmud question. I've posted some advanced trigger questions on there before, and never been dissatisfied! Hoop

Newbie Help

ZMUD Trigger ?coding?