Top Mud Sites Forum Return to TopMudSites.com
Go Back   Top Mud Sites Forum > Mud Development and Administration > MUD Coding
Click here to Register

Reply
 
Thread Tools
Old 05-22-2009, 05:52 PM   #1
eax
New Member
 
Join Date: Jul 2008
Posts: 15
eax is on a distinguished road
Which library to use when building a mud?

I have done a reasonable amount of C programming, I remember looking at code for a very very very basic mud. (Although to you veteran mud coders you would probably laugh when you know the code I am refering to ) I basically used a code snipped from a page , I believe it was called socket mud, it was lightweight, no doubt unoptimised and featureless, however at the time this was great because all I wanted to do was create a socket and use the socket so that say 2 players could connect to some room and chat, I put a room decscription in and I had other things start in RL which meant I didnt follow it up.

I remember way back someone saying that if I wanted to do it seriously I should get accustomed to a code library and the reason being it gives a good solid base to work with that doesnt involve ugly inexperianced hacks which will no doubt be written by myself if I reinvent the wheel It tricky though because its trying to find a balance between having easy code but so badly written it could never work in a proper mud enviroment, to highly optimised code in a massive library of code which may be to complex.

which codebase/library would you suggest working with? Ideally something really flexible and well structured code that is easy to read.

I would like to simply create some rooms to start with, have a traditional fantasy theme, learn to code characters and leveling code, code a basic guild , just all newbie mud writing stuff, ow yeah and getting a handle on whatever network code is in the library I use since this is one area I need to learn more about or I will just be using what works and maybe killing any project I do late in the day through inexperiance

Any thoughts are appreciated?

Theres so much I would like to do but I think with coding you have to start small so Im going to try and not aim to high by discussing what I would really like

Thanks!

Just to update , on crappy vista I put on telnet client and server, in one of the files I changed the host to 127.0.0.1 , next I used nmake to compile the LP source, the mad thing is, earlier on when I set debug output equal to one in an nmake command I was getting errors about a redefined link, I really didnt want to start hacking the code at this point knowing that if there is a problem it will be at my end not the code, so with little documentation I just thought of it logically and it was at that point I installed telnet , I also run nmake without the debug flag and it all compiled fine, I then used the parse.exe which was built, next I login to the mud by doing telnet 127.0.0.1 2000 and I was shocked when it actually worked, I can navigate rooms , fight mobs, read help, register a character , wear armour, however I picked up a stick and could not do wield stick, so I am wandering if everything is working 100%? I will link the library:

MudBytes MUD Code Repository - Files

Can anyone comment on this code ? I can find little documentation and the readme file talks about doing the command
config.mud inet which doesnt seem to be available on windows, but what I figured was doing parse.exe runs the mud server and then I just connect as a client, is all this a good stable basis for learning this library and good to use if waay in the future I was to put out a mud e.g would you advise this is a good code to heavily modify?

Really surpised the things running though but am curious why wield isnt working, hoping its something simple attributed to the fact I have only been on the mud 5 mins

Any comments needed & welcomed

Further update:

Wield seems to be working after all, I also found a docs folder ,however one thing I am unsure about is how to make myself a wizard? How is this usually done?

Last edited by eax : 05-23-2009 at 03:18 PM.
eax is offline   Reply With Quote
Old 05-23-2009, 10:59 AM   #2
eax
New Member
 
Join Date: Jul 2008
Posts: 15
eax is on a distinguished road
Re: Which library to use when building a mud?

Hi again I have decided to go with the LP library, can anyone point me in the direction of a document that shall explain all the tools required and there setup? My plan is to just run a bare mud , make sure I can get it working, I think thats a good starting point
eax is offline   Reply With Quote
Reply


Thread Tools


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 07:38 PM.


Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Style based on a design by Essilor
Copyright Top Mud Sites.com 2014