MUD Coding

welcor · 02-28-2004, 07:18 PM

Well, cgywin have a pretty large documentation site accessible via their front page:

Amongst these is their and a

One of the most important factors when starting to use cygwin is to realise that the setup program will not automatically install everything you'll need to program. Look under the Devel tree in setup, and select the compilers you wish to use. gcc and gcc-g++ sounds like they are what you need. This will automatically select the libraries, etc., that are needed for these tools to work. I'd recommend getting diff-utils as well, under Base. If you find out later you forgot something, you can always run the setup program again, and it will install/remove the packages you de/select.

Scrod Fungus · 03-02-2004, 03:01 PM

Spazmatic · 03-02-2004, 09:09 PM

Also: Experiment. Good fer learnin' yessir.

Jenred · 03-10-2004, 02:36 PM

Its not as complicated as it seems, all you really need is the full version (if your unsure what exactly you need) and run mostly through the bash shell. From there most codebases will give you step by step instructions on commands to enter in a *nix/cygwin environment.

Mostly you'll just be using things like
gzip (which has a help in the bash shell to show what commands go with it and what they do)

make (also has helps)

and then a couple others if your going to be ripping it up and putting it back together like grep and move and all that.

Cygwin and Windows - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CircleMUD on Windows XP	Danlor	Newbie Help	1	12-09-2004 07:08 PM
setting up my own mud with cygwin	UnKnOwN1205	Newbie Help	3	06-27-2004 08:18 PM
C++ and Windows	Scrod Fungus	MUD Coding	3	01-13-2004 11:10 PM
Windows Related Help Request	Ntanel	MUD and RPG Webmasters	0	06-27-2003 07:11 AM
Windows Engine	yagiska	Legal Issues	0	01-22-2003 05:16 AM

02-28-2004, 04:46 PM	#1
Scrod Fungus New Member Join Date: Jan 2004 Location: United States Posts: 11

02-28-2004, 07:18 PM	#2
welcor Member Join Date: Apr 2002 Location: Aarhus, Denmark, Europe Posts: 59	Well, cgywin have a pretty large documentation site accessible via their front page: Amongst these is their and a One of the most important factors when starting to use cygwin is to realise that the setup program will not automatically install everything you'll need to program. Look under the Devel tree in setup, and select the compilers you wish to use. gcc and gcc-g++ sounds like they are what you need. This will automatically select the libraries, etc., that are needed for these tools to work. I'd recommend getting diff-utils as well, under Base. If you find out later you forgot something, you can always run the setup program again, and it will install/remove the packages you de/select.

03-02-2004, 03:01 PM	#3
Scrod Fungus New Member Join Date: Jan 2004 Location: United States Posts: 11

03-02-2004, 09:09 PM	#4
Spazmatic Member Join Date: Mar 2003 Posts: 103	Also: Experiment. Good fer learnin' yessir.

03-10-2004, 02:36 PM	#5
Jenred Member Join Date: Jun 2002 Posts: 55	Its not as complicated as it seems, all you really need is the full version (if your unsure what exactly you need) and run mostly through the bash shell. From there most codebases will give you step by step instructions on commands to enter in a *nix/cygwin environment. Mostly you'll just be using things like gzip (which has a help in the bash shell to show what commands go with it and what they do) make (also has helps) and then a couple others if your going to be ripping it up and putting it back together like grep and move and all that.

MUD Coding

Cygwin and Windows